This is the era of modern and most ergonomic chairs. However my chair-raising comrades! If you possess one that becomes faulty or uses a conventional way of height adjustment, you are still not short of options to raise your chair height without using a lever.
It’s possible, mate!
Just a little effort and you can push your chair seat to a desired height. So, how to raise an office chair without a lever?
There are few methods through which you can do it. Once very famous is the bolt method. Along with that, height lock fastening and wood method do the trick for you. The only thing is how correctly you implement these tricks to achieve the goal. Let’s jump to it;
How to Raise Office Chair Without Lever:
While raising the chair height, it is always recommended to do a little math before you play with tools to dissemble or detach some chair’s part. Ideally, mapping down the feasible height is a crucial part as it’s related to your bodily health.
Why Knowing the Right Chair Height is Important?
Technically, this is especially important if you have a desk job, which requires you to sit for long periods. Poor posture and an incorrect sitting position can lead to a host of health issues, including neck and back pain, carpal tunnel syndrome, and even headaches.
In fact, did you know that up to 80% of adults will experience back pain at some point in their lives? And sitting in a chair with poor ergonomics can exacerbate these issues. That’s why it’s crucial to take the time to adjust your chair to fit your body properly.
So, Ensuring that your chair is at the right height, you must note down;
- Your feet rest comfortably on the floor and your knees are at a 90-degree angle.
- The backrest should support the curve of your spine, and your arms should be able to rest comfortably on the armrests
- In this posture, your shoulders should not shrug.
Factually, these small adjustments can make a huge difference in your comfort and overall health.
How to Adjust Office Chair Height Without Lever Via Rotating Method:
This is the easiest method and doesn’t require any special tool to get done. However, this method is applicable to specific chairs with “Post” design. So, you do it;
- Stand beside the chair, as adjusting the height while sitting in it isn’t possible.
- Locate the seat post, which is the long, central column connecting the chair base to the seat.
- To lower the chair, turn the seat clockwise, and to raise it, turn it counterclockwise. Your chair will raise to 0.25” or 0.375 in some models when a complete rotation gets done. So, for example. When you need to rotate it counterclockwise to make adjustment, 4 complete rotations will raise the chair height from 1-1.50 inches.
- Sit in the chair to check if you have achieved the right height. And Remember, what I told you about the right posture; Your feet should be flat on the floor, and your knees should be at a 90-degree angle. If the height is still not correct, repeat step 3.
- Once you have achieved the right height, you’re all set! Enjoy the comfortable and ergonomically-friendly sitting position.
Don’t Forget, maintaining the correct sitting posture is crucial for your overall health and wellbeing. So, make sure to adjust your chair height to prevent any discomfort or pain in your back, neck, or shoulders.
Tightening the Post:
Before you tighten the post or in case your seat isn’t spinning or you are feeling hard to rotate it; lubricating the post will greatly help the cause. So, Alright, let’s break down the steps to tighten the connection between the post and the base of your swivel chair.
To non-techies, Don’t worry, it’s a pretty straightforward process.
- First things first, locate the set screw that holds the mounting socket in place. This is usually found underneath the chair, where the post connects to the base.
- Grab your screwdriver or Allen wrench and use it to tighten the set screw in its position. The Allen wrench is a great option for this because it can reach tight spaces easily.
- Tighten the screws all the way until the connection of the post and the base is tight.
- Now place the foot on the base so it can’t move from its position. Raising or lower the chair height is in your hand now. Rotate anticlockwise or clockwise as per your desired adjustment.
The Bolt Method:
Many older chairs have been using this method to go up and down. The main idea of this method is a bold acting as a support for the chair’s position. You raise the support, the chair seat will be adjusted to higher heights. You lower the support, the chair will come lower.
So, this is how you do it;
- Look for the bolt located underneath the seat of your office chair.
- Turn the bolt clockwise to lower the chair or counterclockwise to raise it.
- Keep adjusting the bolt until you achieve the desired height.
The Good and Bad things About This Method:
Raising the chair height has positive and negative implications as well. Positively, it’s simple and doesn’t require any additional tools. Additionally, it can provide a more precise height adjustment than the lever in some cases.
On the other hand, the main drawback of this method is; it can be more time-consuming than simply using the lever to adjust the height. Additionally, it may not be as comfortable to adjust the height using the bolt, especially if you have to do it frequently throughout the day.
The Bottom Line:
So, how to raise an office chair without a lever? The methods used for this purpose aren’t much technical or time consuming, however, to get rid of this issue permanently, you should replace your old office chair with a new one as it’s significantly related to your postural health.
A chair enthusiast and expert in ergonomic design, is dedicated to helping you choose the ideal gaming or office chair. With a keen eye for comfort and a passion for optimal seating, I will provides insightful guidance for an enhanced seating experience.